1/4” HEX CHUCK ADAPTER and EXTENSION CLAMP
If you haven’t yet seen the Tite-Reach Socket Extension, then crawl out from under that rock and check it out. It has saved us plenty when trying to turn a fastener deep in the engine bay. Ever try to change the coil packs on a 5.7L Hemi Ram, the ones in the back are literally under the firewall, nearly impossible without the socket extension.
Well, now the good folks at Tite-Reach have done it again with a 1/4″ Hex Chuck Adapter. Now you can add a phillips head, other fastener driver or hex drill bit to the end of a 1/4″ socket extension and get the job done.
Have you ever lost a nut? Get The Extension Clamp
The Tite-Reach Extension Clamp is just the tool for you. Hold your nuts (and bolts) tight in those deep creavaces. Super slim to get in and get the job done. Made of steel and works for real!
Get em both at:
TITE-REACH.com